|Year : 2019 | Volume
| Issue : 4 | Page : 419-433
Molecular characterization of alkaline protease-coding gene from Bacillus licheniformis MK90 mutants with biofilm inhibitory activity
Ahmed A Hamed1, Mohamed Khedr2, Mohamed Abdelraof1
1 Department of Microbial Chemistry, National Research Centre, Dokki, Giza, Egypt
2 Department of Botany and Microbiology, Faculty of Science, Al-Azhar University, Nasr City, Cairo, Egypt
|Date of Submission||17-Sep-2019|
|Date of Acceptance||16-Oct-2019|
|Date of Web Publication||28-Jan-2020|
PhD. Ahmed A Hamed
Department of Microbial Chemistry, National Research Centre, Dokki, Giza
Source of Support: None, Conflict of Interest: None
Background Enzymes are organic materials that accelerate biochemical processes without themselves undergoing change. They can be produced by plant, animal, fungi, and bacteria. Bacterial proteases are much favorable than any other sources, because bacteria can grow quickly and can be easily cultivated in laboratory.
Objective To isolate and screen bacteria from soil samples for their ability to produce alkaline protease, and to improve the alkaline protease production followed by evaluation of its antimicrobials and antibiofilm activity.
Materials and methods Sample collection was carried out from different locations in Egypt. Isolation of bacteria from soil samples was done using serial dilution method on skim milk agar. All isolated bacteria were screened for their ability to produce protease enzyme. The bacterial isolate showing maximum alkaline protease activity was identified using 16 S rRNA genetic identification. To induce mutations, ultraviolet (UV) irradiation was used. The most active mutant strains were selected for production, purification, and characterization of alkaline protease followed by evaluation of alkaline protease antimicrobial and antibiofilm activity.
Results and conclusion Three UV mutants (MT2, MT4, and MT26) out of 48 displayed proteolytic activity more than other mutants and wild type (WT). Bacillus alkaline extracellular protease gene was genetically characterized through isolation of the genomic DNA of Bacillus licheniformis MK90 WT, and the best protease-producing UV mutants were followed by amplification, sequencing, and analyses. WT strain and best protease-producing mutants were compared at proteomic level through sodium dodecyl sulfate polyacrylamide gel electrophoresis for total cellular proteins. Then protease enzyme of WT and mutants was purified and characterized. This study reports that the B. licheniformis protease was active at an alkaline pH and wide range of temperatures (40–60°C), reflecting its potential application in detergent and laundry industries. On the contrary, the antibiofilm activity of the protease enzymes was evaluated toward four pathogenic bacterial strains, i.e., Staphylococcus aureus, Pseudomonas aeruginosa, Escherichia coli, and Bacillus subtilis, and the results showed that proteases from B. licheniformis MK90 may be useful for controlling biofilm formation by some pathogenic bacteria.
Keywords: antibiofilm, Bacillus licheniformis MK90, mutagenesis, Bacillus alkaline extracellular protease
|How to cite this article:|
Hamed AA, Khedr M, Abdelraof M. Molecular characterization of alkaline protease-coding gene from Bacillus licheniformis MK90 mutants with biofilm inhibitory activity. Egypt Pharmaceut J 2019;18:419-33
|How to cite this URL:|
Hamed AA, Khedr M, Abdelraof M. Molecular characterization of alkaline protease-coding gene from Bacillus licheniformis MK90 mutants with biofilm inhibitory activity. Egypt Pharmaceut J [serial online] 2019 [cited 2020 May 29];18:419-33. Available from: http://www.epj.eg.net/text.asp?2019/18/4/419/276729
| Introduction|| |
Enzymes are organic materials in the cells of living organisms in small concentrations that are able to accelerate biochemical processes without themselves undergoing change. They can catalyze the reaction without necessarily starting it . Recently, extracellular hydrolytic enzymes like proteases, amylases, DNases, lipases, pullulanases, and xylanases were found to be very useful in many applications processes such as food industry, biomedical sciences, feed additive, and chemical industries .
Based on their optimal pH, proteases are classified into three groups: ‘alkaline, acidic, and neutral proteases.’ Acid proteases work at pH ranged from 2.0 to 5.0, and they are almost only synthesized by fungi. The second group is neutral proteases that act at pH ranged from 7.0 to 8.0, and they are mainly produced by plants, and finally, alkaline proteases, with pH from 8 and above . Proteases are widely distributed in nature, and they are found in all living organisms such as plants, animals, and microbes . The microbial proteases are much favorable than any other sources because microbes can grow quickly and easily cultivated in laboratory .
Recently, high degree of concern has been directed for using alkaline protease for many reasons; they have high hydrolytic activity, have high degree of substrate specificity , and are active in a neutral to alkaline pH . Alkaline proteases are one of the most important enzymes used in industrial applications, like pharmaceuticals, detergents ,, meat tenderizers, leather, protein hydrolysis, food products, and waste recycling. Microbial origin is the most common sources of alkaline proteases. They can be produced by bacteria , actinomycetes ,,, yeast , and fungi . Bacterial proteases are of utmost importance owing to their properties and also bacteria can easily be genetically modified in the laboratory. Alkaline proteases produced by Bacillus spp. have shown high activity and stability at different temperature and pH ranges ,,,. Recently, genetic modification of bacteria has been proved to be an efficient tool to optimize the production and the quality of enzymes . This can be achieved by DNA modification through mutation induction by using chemical or physical mutagens .
Bacterial biofilms are aggregate of bacteria in a self-producing matrix . This process makes bacteria able to strongly attach on many living and nonliving surfaces. Bacterial biofilms are considered as one of the major hindrances against medication and control of infectious disease. It makes microbes resistant to antimicrobial agents . Bacterial biofilm was found to be highly resistant to host immune defenses and antibiotics . Biofilm matrix consists of different macromolecules known as extracellular polymeric substances. Extracellular polymeric substance serves as a tertiary biofilm structure, which facilitates cell-to-cell communication and surface adhesion . For a long time, polysaccharides were thought to be the major component of the biofilms . Recently, new studies have been reported that proteins also play a very important role in the biofilm formation . Despite many trials being conducted to eradicate biofilm synthesis, there is still undeniable need to discover an efficient way to control biofilm formation by bacteria.
The introduced study was carried out to improve enzyme production and quality via genetic modifications of Bacillus strain isolated from hot springs of Sinai through ultraviolet (UV) mutagenesis. Furthermore, the application of the produced enzymes as antibiofilm against four pathogenic bacteria was also studied.
| Materials and methods|| |
Sample collection and isolation
Sample collection was carried out from different locations in Egypt. Samples were kept and stored at 4°C. Isolation of bacteria from soil samples was done by suspending of 1 g in 9-ml sterilized distilled water, followed by serial dilutions in sterile distilled water . Overall, 50 μl of certain dilution was added on skim milk agar with following components (g/l): peptone, 5.0; NaCl, 5.0; agar, 20; and skimmed milk, 100, with pH 8, and incubated at 50°C for 3 days.
Qualitative screening of alkaline protease activity
To screen all isolated bacteria for their ability to produce protease enzyme, casein agar medium was used with following components (g/l): casein, 5.0; glucose, 5.0; and agar 20 ,. All isolated bacterial isolates were inoculated aseptically on the plates, and then the plates were incubated in inverted position at 37°C for 24–72 h. The appearance of clear zone (zone of proteolysis) indicates positive result.
To produce alkaline protease enzyme, the most potent bacterial strains based on the qualitative screening were grown on yeast extract casein broth medium , with the following composition (g/l): glucose, 10.0; casein, 5.0, yeast extract, 5.0; KH2PO4, 2.0; K2HPO4, 2.0; and MgSO4.7H2O, 1.0. After inoculation, growth cultures were incubated for 72 h in a shaking incubator (170 rpm) at 37°C. The pH of the medium was adjusted to 9.0–9.5. After incubation, the fermented cultures were centrifuged at 8,000 rpm, at 4°C, for 20 min, and the clear supernatant was used as the crude enzyme.
The enzyme assay was measured by modified method of Yang et al. . The activity was measured using casein as a substrate at a concentration of 1% w/v in 50 mM glycine-NaOH buffer (pH 10). The reaction mixture was monitored by adding of 0.5 ml of enzyme solution to 2.5-ml casein solution and incubation for 1 h at 30°C. To terminate the reaction after the incubation time, 2.5 ml of 0.44 M trichloroacetic acid solution was added, and after 10 min, the mixture was centrifuged at 8000 rpm for 10 min. An aliquot of 0.5 ml of supernatant was mixed with 2.5 ml of 0.5 M Na2CO3 and 0.5 ml of Folin–Ciocalteu’s phenol solution and kept for 30 min at room temperature, and the optical densities were measured at 660 nm.
Protein concentration was measured according to Lowry et al. , and protein concentration was followed by its absorbance at 280 nm.
Molecular identification of the most potent isolate
The bacterial isolate showing maximum alkaline protease activity and maximum proteolytic zone size was selected and identified using 16S rRNA genetic identification . The sequence produced was analyzed by using BLAST, and the phylogenetic tree was constructed using MEGA 7 (available at https://www.megasoftware.net) software.
To induce mutations in the most potent alkaline protease producer Bacillus licheniformis MK90, UV irradiation was used according to modified method of Khedr et al.  where bacterial cell suspensions were exposed to UV irradiation at a distance of 20 cm for 3, 5, 7, and 10 min. After UV irradiations, the treated suspensions were kept for 1 h in dark place, and then 1 ml from treated cells with suitable dilution was incubated on LB supplemented with casein and minimal casein .
‘Sodium dodecyl sulfate polyacrylamide gel electrophoresis’ (SDS-PAGE) was used to separate proteins with relative molecular mass more than 10 kD . According to Laemmli , Harlow and Lane , and Sambrook and Russell , SDS-PAGE was prepared for analysis of the expressed proteins .
DNA isolation and designing of primers
The genomic DNA of the B. licheniformis wild type (WT) and the highest three alkaline protease producing UV mutants was isolated using ‘EasyPure bacteria genomic DNA kit.’ To measure the complete nucleotide sequence of the Bacillus alkaline extracellular protease (BAEP) gene, two primers were selected via ‘NCBI primer design tool’ and named Khedr-F (5-GTGCATCCTCTTCCGGTCAA-3) and Khedr-R (5-TTGCCATCGAGGTTCCTGAC-3). For this purpose, information was derived on conserved sequences around coding nucleotide sequences (upstream and downstream) of the complete alkaline protease genes of three Bacillus sp. on GenBank. The individual nucleotide sequences were aligned by CLUSTALW online software to identify the conserved sequences (Kyoto University Bioinformatics Center).
PCR amplification of Bacillus alkaline extracellular protease
PCRs were carried out in a programmable DNA thermal cycler PCR system. PCR reaction mixture was optimized to 25 µl that contains 40 ng (6 μl) of template (bacterial) DNA solution and 8.5 µl of master mix, which includes dNTPs mix, MgCl2, Taq polymerase, and PCR buffer. Primers were added separately after preparation from lyophilized stock (1 µmol/l of each primer). The amplified DNA product along with a DNA marker [gene ruler 100 bp DNA ladder (SM0241)] was separated by electrophoresis using 1% agarose gel in TAE. The gel was stained with ethidium bromide, and the banding profile was recorded using UV-gel documentation system. The amplified DNA product was purified and sequenced.
Partial purification of alkaline protease and characterization
After the fermentation, the cells of WT and mutant strains were removed from the crude supernatant by centrifugation at 12 000 g for 10 min. The proteins in the extracellular extract of the WT and mutant strains were precipitated by salting out with ammonium sulfate fractionation. The calculated volume of ammonium sulfate was combined with culture supernatant with constant stirring in cooling condition to obtain 40, 60, and 80% saturation. The obtained precipitate recovered by centrifugation (10 000 g for 10 min at 4°C) was dissolved in a low-quantity citrate-phosphate buffer (pH 7.5) and then dialyzed against the same buffer in cellophane bag in refrigerator for further times to ensure complete elimination of the salt, as checked by reaction with barium chloride. The fractions with the maximum proteolytic activity were pooled and used for subsequent characterization.
Effect of pH on activity and stability of partially purified alkaline protease
The optimum pH for proteolysis activity was determined in the reaction mixture along with pH range of 5–11 using 50 mmol/l of citrate-phosphate buffer (pH 4.0–8.0) and carbonate-bicarbonate buffer (pH 9.0–11.0). For pH stability, the enzyme preparations were pre-incubated at different pH levels (5.0–11.0) for 6 h at 30°C. Then, the residual activity was determined at the optimum pH value.
Effect of temperature on activity and stability of partially purified alkaline protease
The optimal temperature for the proteolysis activity was measured by incubating the reaction mixtures in 50 mmol/l glycine-NaOH (pH 10.0) at different temperatures (30–80°C) for 30 min. The relative enzyme activity was calculated as the percentage of its maximal activity. Thermal stability assays were conducted by preincubating the enzyme at 40, 50, 60, 70, and 80°C. Aliquots were drawn at desired time intervals, and the remaining activity was tested at 50°C, pH 10.5. The unheated enzyme was used to define 100% activity.
Antimicrobial activity of partially purified protease
The antimicrobial activities of the partially purified enzymes were measured using the agar well diffusion method with some modification .
To measure the biofilm inhibitory activity of the partially purified enzymes, MTP assay was carried out using 96-well flat-bottom polystyrene titer plates and four clinical microbes, i.e., ‘Pseudomonas aeruginosa, Staphylococcus aureus, Escherichia coli, and Bacillus subtilis,’ according to Christensen et al. . In brief, each well was filled with 180 μl LB broth, 10 μl of overnight pathogenic bacteria, and 20 μl of the sample, along with control (without test sample), and incubated at 37°C for 24 h. After incubation, the content of the wells was removed, and the wells were washed with 200 μl of phosphate buffer saline pH 7.2 to remove the floating bacteria. For staining, 200 μl/well of crystal violet (0.1%, w/v) was added. To remove the excessive stain, the wells were washed with 200 μl/well deionized water and kept for drying. Furthermore, dried plates were washed with 95% ethanol, and optical density was determined at optical density of 570 nm by using a Spectrostar Nano Microplate Reader (BMG Labtech GmbH, Allmendgrun, Germany).
| Results and discussion|| |
Isolation and screening of protease producer
Protease-producing bacteria were isolated and purified on casein medium. After 24 h of incubation, the bacterial growth with a clear zone around was marked as a positive producer. [Table 1] summarizes the proteolytic zone size of each bacterial isolate. Asha and Muthusamy  screened 30 bacterial isolates on skim milk agar plates and found that all of them had proteolytic activity. Nayab et al.  isolated 70 protease-producing bacterial strains out of 100 isolates on skim milk agar plates, and these isolates were diverse between higher proteolytic and lower proteolytic isolates. The most potent isolate among the rest of the isolates was isolate ASH70 with clear zone of 17 mm, followed by two isolates ASH85 and ASH100, with 16 and 15 mm of clear zones, respectively. The most potent strains were cultured in the production media at 37°C, pH 8.0, for 24 h, and assayed quantitatively, and the cell-free supernatant of isolate ASH70 displayed the highest protease activity (33.3 U/ml). Several investigations reported that the optimum pH of alkaline proteases ranged from 8 to 11 ,,,,.
|Table 1 Screening protease productivity by proteolytic zone (mm) on casein agar for 24 h of incubation at 37°C|
Click here to view
Molecular identification of the most potent alkaline protease producer
Bacterial isolate ASH70 was identified by 16S rDNA  as B. licheniformis MK90, and the sequence was deposited in the gene bank (accession number KY366269.1). Sequence was analyzed versus others on Gene bank database through online BLAST tool to determine the similarity score (http://www.blast.ncbi.nlm.nih.gov/Blast). The obtained result confirmed a very close similarity of the 16S rDNA gene sequence with 97.73% homology of the isolate ASH70 with B. licheniformis. The phylogenetic tree was constructed using MEGA 7 program  and neighbor-joining method  ([Figure 1]).
|Figure 1 Phylogenetic relationship between Bacillus licheniformis MK90 and other members of Bacillus sp.|
Click here to view
Mutagenesis by ultraviolet treatment
Cyclobutane pyrimidine dimers and pyrimidine (6–4) pyrimidone photoproducts at dipyrimidine sites (two pyrimidine (Py) bases are adjacent in nucleotide sequence of DNA) are DNA mutations considered as damaged and induced by UV irradiation. These UV lesions resulted from photochemical reaction; their efficiency depends on the wavelength, following direct UV energy absorption by DNA bases . Volff et al.  noted that nitrosoguanidine and UV rays induced mutation in the structural genes coding enzymes responsible for the biosynthesis. However, most prokaryotes and all eukaryotes have highly conserved regions called protein systems that recognize DNA mismatches, and many DNA damages play significant roles in maintenance of genetic stability . These long patch mismatch-repair systems minimize DNA replication mistake rates 100-fold to 1000-fold, by identifying and repairing base/base and insertion/deletion-loop out mismatches that flee from proofreading by DNA polymerase. Martinez and Baquero  explained that the mutation process in bacterial cells does not occur regularly. Many factors affect the rate and type of mutants that can be chosen under pressure. Furthermore, the appearance of mutations that produce mutator phenotypes in bacteria and the ability of some antibiotics to increase mutability are more complicated to understand the effects of population dynamics on the emergence of antibiotic-resistant mutants in bacteria.
Moreover, Liu et al.  used too low UV doses to make SOS functions; most incorrect bases versus occasional photoproducts may be eliminated by mismatch repair. However, in heavily irradiated (SOS-induced) cells, mismatch repair is limited and corrects only some photoproduct/base mismatches, so UV mutagenesis remains fundamental. Strain B. licheniformis as a parental strain or WT was treated with UV radiation at wavelength 254.5 for different periods of time 3, 5, 7, and 10 min, and all the available colonies appeared after UV treatment were isolated. All colonies were grown on casein agar medium and tested for their ability to produce protease enzyme. Based on the enzymatic activity results of the produced mutant strains, three mutants (M2, M4, and M26) were considered as the highest alkaline protease producers with specific activity (22.4, 40.9, and 51.8 U/ml, respectively). These results were nearly identical when compared with qualitative screening of the resultant mutants ([Table 2] and [Table 3]).
|Table 2 Proteolytic zone on skim milk agar medium owing to protease activity of random ultraviolet mutants and their wild type for 72 h of incubation at 37°C|
Click here to view
|Table 3 Quantitative screening of alkaline protease of random ultraviolet mutants and wild type|
Click here to view
PCR and DNA sequence analysis of BAEB
The resulting four PCR products of parental strain and its three mutants were sequenced. Sequencing of amplified protease gene showed 557 bps in WT and its three UV mutants, as showed on agarose gel electrophoresis ([Figure 2]), with 100% similarity, without any base pair change or single nucleotide polymorphism. The apr gene was obtained by PCR using the genomic DNA of B. licheniformis CICIM B5102 as a template. PCR product was 1.8 kb bp of the apr gene . The sequencing reactions were carried out by Sanger Sequencing Technology on Applied Biosystems automated DNA sequencer, model ABI 3730XL DNA Analyzer (Applied Biosystems, Beverly, MA, United States; service provided by Macrogen Inc., South Korea). The sequence analyses and alignments were performed by NCBI-BLAST programs of the National Center for Biotechnology Information . The resultant gel electrophoresis bands were analyzed through Gel-Analyzer software. Khedr et al. have isolated, amplified, and sequenced AmyE gene that coded a thermo-stable α-amylase enzyme from B. licheniformis MK90; the gene was estimated to be approximately 1539 bp and encoded a 515-residue protein, composed of a 25-amino acid putative signal peptide and a 490-amino acid mature protein . Phylogenetic tree was constructed on the basis of B. licheniformis MK90 incomplete sequence of BAEP and other related Bacillus sp. using NCBI-BLAST online and modified through tree viewer software ([Figure 3]).
|Figure 2 Electrophoretic patterns of partially amplified alkaline protease gene from Bacillus licheniformis MK90 and its UV mutants with DNA 100 bp ladder; amplified product was estimated to be nearly 557 bp. Lanes 1 and 2 from left (Bacillus licheniformis MK90 wild type), lane 3 (Mutant 2), lane 4 (DNA ladder), lane 5 and lane 6 (Mutant 4), lane 7 and lane 8 (mutant 26), and lane 9 (DNA ladder). UV, ultraviolet.|
Click here to view
|Figure 3 Phylogenetic tree constructed according to Bacillus licheniformis MK90 protease gene and other members of Bacillus sp. carried out by NCBI-BLAST online software.|
Click here to view
Nucleotide partial sequences of BAEP from the parental strain (WT) and its three mutants were compared with each other using online Cluster W beside jalview, version 2 (a multiple sequence alignment editor and analysis workbench) ([Figure 4]). The three nucleotide sequences measured nearly 557 bp. The four nucleotide sequences were identical without any mutations in any one of them. Kaur et al.  isolated and amplified the alkaline protease gene of Bacillus circulans, and the amplified sequence was estimated to be approximately 1,360 bps.
|Figure 4 DNA alignment through CLUSTAL OMEGA online between protease gene sequence from parental strain (row 1) and the two UV mutants. Mutant 1 (row 2), mutant 2 (row 3), and mutant 3 (row 4) using Jalview software. UV, ultraviolet.|
Click here to view
Amino acid sequence alignment
The corresponding predicted protein (amino acid) sequence of BAEP gene was also blasted into NCBI-blast (protein) function, available at http://www.ncbi.nlm.nih.gov/BLAST, for identifying any nucleotide change (induced UV mutagenesis). The four sequences of parental strain and its three mutants were analyzed via SnapGene viewer, version 220.127.116.11 software, to translate the nucleotide sequence of genes into amino acid sequences to observe the effect of UV in the gene expression and amino acid sequence of enzyme. The 557 bp coded for 185 amino acids. Amino acid sequences resulting after software analysis are presents in [Figure 5] and showed no change in amino acid sequences within three mutants against WT sequence. Amino acid symbols were coded according to SnapGene software (from GSL Biotech; available at https://www.snapgene.com/) amino acid table.
|Figure 5 Multiple alignments of amino acid sequence for parental strain WT (row 3) and the best three mutants (rows 1, 2, and 4). WT, wild type.|
Click here to view
Sodium dodecyl sulfate polyacrylamide gel electrophoresis analysis of alkaline proteases of wild-type Bacillus licheniformis MK90 and selected mutants
This step was carried out to monitor changes in mutants against WT, as no changes were obtained on the level of amplified sequence of BAEP gene. The total cellular protein profile of the higher enzyme-producing mutants M2, M4, M26 and parental strain was performed using SDS-PAGE with protein marker, and the results are presented in [Figure 6]. Gel was analyzed with gel-analyzer 2010 software, and results showed remarkable differences between WT and the selected mutants. WT showed 10 bands, whereas M4 showed eight bands, M26 showed 12 bands, and M2 showed 13 bands. Proteomic analysis via SDS-PAGE showed remarkable band changes among mutants themselves and WT. Different protein patterns refer to mutation of DNA of tested mutants, and these mutations are constant, which are transferred through generations along subculturing. Protease molecular weight of WT and its mutants was nearly 30 kD in comparison with bovine serum albumin) ladder. Similar results had been noted by Kumar and Takagi , as their microbes produce alkaline protease enzyme with molecular weight ranged from 15 to 30 kD. Nearly similar results were also achieved by Barth and Gaillardin , when they worked on Yarrowia lipolytica, which produced alkaline extracellular protease with 32 kD. Marine yeast Aureobasidium pullulans also produces alkaline protease with the same molecular weight of Yarrowia lipolytica .
|Figure 6 SDS-PAGE analysis for total protein of the most potent producer mutants (M2, M4, and M26) in comparison with wild type (WT). SDS-PAGE, sodium dodecyl sulfate polyacrylamide gel electrophoresis.|
Click here to view
Alkaline protease purification and characterization
Among several mutant strains of B. licheniformis isolated after UV-mutagenesis, M26, M4, and M2 strains were selected for further characterization. Proteolytic activity in culture supernatants of B. licheniformis and its mutants was evaluated during cultivation period (96 h). Enzyme production during incubation period by WT and mutant strains grown in casein medium showed a linear increase on protease production and biomass yield, reaching optimum values at 3 days for the WT, whereas the maximum enzyme activity was noted after 2 days for the mutant strains (data not shown). However, on additional increase of incubation time, a detectable decrease in both enzyme productivity and biomass could be observed, and this might relate to nutrient limitation or accumulation of inhibiting substances . The highest enzyme activities were obtained with M26 and M4 mutants, which produced 1.5-fold and 1.2-fold more protease productivity, respectively, as compared with WT strain. Nevertheless, the mutant strain M2 showed a notable increase in the growth rate with 1.4-fold decreases in enzyme yield, and this is owing to the high protein level produced by this mutant.
B. licheniformis protease was then subjected to precipitation by ammonium sulfate (partial purification) from crude culture supernatant as described in ‘Materials and methods.’ As can be seen in [Table 4], ammonium sulfate salting out followed by dialysis led to a 1.87-fold and 2.24-fold increase of specific activity for M26 and M2 mutant strains, respectively, with 40% ammonium sulfate saturation. Meanwhile, the maximum fractions for the WT and M4 mutant strain were obtained at 60% ammonium sulfate saturation with 1.98-fold and 2.66-fold increase of specific activity.
|Table 4 Partial purification of alkaline proteases via salting out with ammonium sulfate|
Click here to view
Further studies were implemented to characterize the WT and mutants of B. licheniformis extracellular protease. The effect of pH on the catalytic enzyme activity was tested in pH range 5–11 using different buffer systems. As shown in [Figure 7], protease has been found to be active at broad pH intervals (7.0–10.0) with respect to the maximal pH activity at eight and nine for WT and mutant strains, respectively. On the contrary, the pH stability of the enzyme was showed maximally at pHs ranging from 7.0 to 8.5 of the WT, whereas enzyme derived from mutant strains exhibited its significant catalytic stability in the broad range of pH 7.0–10.0. A slight decrease in the enzyme activity was observed at pH 11, whereas at pH 5, the enzyme retained approximately 64.5, 65.4, and 77.8% of their initial activity of each of M2, M4, and M26, respectively, reflected the significant inhibitory influence on protease activity at acidic pH conditions (5 : 6).
These results revealed that the enzyme was alkaline protease, particularly for the mutant strains. Our results are consistence with several earlier reports showing pH optima being close to pH 9.0 ,,. However, this variety of optimum catalysis is relatively wide as compared with most previous reports ,. Generally, commercial proteases from Bacillus sp. have maximum activities within the alkaline pH range of 8.0–12.0 ,. In other words, the enzyme activity of mutant strains was very stable when the pH was between 7.0 and 11.0. However, the enzyme activity of the WT decreased rapidly when incubated in pH 11.0 (57%). The proteases from mutant strains have become stable between pH 8.0 and 11.0., with maximal stability at the pH range of 8.0–10. The induction of protease from the mutant strains of B. licheniformis was found to be varying from that relating to other Bacillus sp., which exhibits a strong loss of alkaline protease stability at pH 10.0 and 11.0, respectively ,. In accordance with our results, the alkaline proteases from Bacillus sp. have also been considered to be stable with the same pH range . These results indicate the enzyme derived from the mutant strains is more desirable for potential industrial applications, such as detergent industries, which needs alkaline pH stability . The high enzyme activity in alkaline conditions can be a significant factor required in almost all detergent enzymes, where the pH range of detergents is between 9.0 and 10.5. It evidenced that the enzyme produced by mutant strains could presumably be beneficial in the detergent industries. Meanwhile, the enzyme is more effective at alkaline conditions in comparison with the detergent enzymes mainly used in the industry, like those produced by B. licheniformis (Alcalase) and by Bacillus clausii (Savinase), which has a maximal catalytic activity at pH 8.5 .
The thermo-dependence curve of protease activity indicated that the enzyme exhibited activities between 30 and 40°C, with its highest activity at 30°C for the WT ([Figure 8]). In contrast, the optimal assay temperature for the mutant strains was noticed in the range between 40 and 50°C, with its maximum activity at 40°C for M2 and M4 strains and 50°C for M26 mutants. The enzyme activity lost about 62, 21, 18, and 36% of its initial activity at a reaction temperature of 60°C for WT, M26, M4, and M2 strains, respectively.
The thermostability investigations in the partially purified protease revealed that the protease from mutant strains was definitely stable within temperatures of 50° C after 1-h incubation. The enzyme remained fully active after 100-min incubation at 40°C. Even at 60°C, the remainder protease activity was 40, 68, 84, and 64%, for WT, M26, M4, and M2, respectively, where the enzyme lost more than 60% of its initial activity for the WT ([Figure 9]). These results confirm that the enzyme could be utilized under moderate thermal conditions. Furthermore, after heating the partially purified enzyme at 70°C for 1 h, the enzyme still retained approximately 57.9% of its original activity. Close to these results, the optimal temperature for the protease activity was achieved at 60°C, which had been observed in Bacillus cereus by Ghorbel et al. , Bacillus pumilus by Kumar , and Bacillus mojavensis by Beg and Gupta . Our results were better than that reported from B. licheniformis MP1 , whereas the enzyme activity was retained fully even after incubation for 2 h at 50°C, in contrast remained only 41 and 5% after being incubated for 1 h at 60°C and 20 min at 70°C, respectively. This thermal stability would have been a preference of this enzyme application in the industry sectors including laundry detergent formulations.
Close to our results, proteases from Geobacillus sp. PA-9, B. mojavensis, and Bacillus sp. SSR1 have been shown to display an optimum temperature of 65, 60, and 50°C, respectively ,. As reported previously, the higher optimum temperature of 60°C has been reported for alkaline proteases belonging to Bacillus stearothermophilus F1 and Bacillus sp. JB-99 . The alkaline proteases produced by the GUS1 strain are highly stable at 70°C. After 60 min of incubation at 70°C, the enzymes retained 100% of their original activities . Khajeh et al.  reported that, in case of thermophilic proteases, activation is obtained, and this might be related to the stimulation of flexibility in their relatively rigid structure.
Antimicrobial activity of Bacillus licheniformis MK90 extracellular protease
The antimicrobial activity of the extracellular proteases produced by B. licheniformis MK90 WT and mutants (M2, M4, and M26) was evaluated using agar well diffusion techniques against four pathogenic microbes, representing gram-negative bacteria (S. aureus), gram-positive bacteria (P. aeruginosa), yeast (Candida albicans), and fungi (Aspergillus niger). The results showed that only proteases of mutants 4 and 26 displayed a low to moderate inhibition activity against gram-positive S. aureus when compared with gentamycin as control. Similar results had been noted by Indarmawan et al. , when they tested the protease enzyme of Xylaria psidii KT30 against five pathogenic bacteria, and the protease enzyme exhibited antibacterial activity only against gram-positive bacteria.
Research over the past few decades has now clearly established the mechanism of bacterial biofilm formation. Studies reported that once bacterial cells attach to a surface, they secrete a complex exopolymer, consisting of proteins, polysaccharides, and nucleic acids ,,. This phenomenon helps bacteria to preserve their attachment to the surface and to maintain bacterial cells in close proximity to each other . Recently, researchers have found that biofilm plays a very important role in the persistence of bacterial infections. They reported that bacteria become more resistant to antibiotic within a biofilm matrix compared with planktonic bacterial cells . Thus far, biofilms are recognized as a remarkable source of pathogens that are involved in specific infectious diseases, such as periodontitis, osteomyelitis, dental caries, otitis media ,,, pulmonary infections of patients with cystic fibrosis, and nosocomial infections such as urinary tract, lower respiratory tract and surgical site infections . In 2012, the French association RAISIN ‘Réseau d’alerte, d’investigation et de surveillance des infections nosocomiales’ did a survey and reported that, most frequent bacterial pathogens associated with nosocomial infections were high biofilm producers, such as ‘E. coli, S. aureus, P. aeruginosa, and Kebsiella pneumonia’ .Despite several trails to inhibit bacterial biofilm formation, no drugs are in clinical use that specifically target bacterial biofilms. Recently, new studies have reported that biofilm eradication could be achieved via enzymatic hydrolysis of matrix and adhesin proteins that play a very important role in the biofilm formation ,.
Recently, several reports have studied the use of proteases as antibiofilm agent by degradation of the biofilm matrix proteins that play diverse roles in biofilm backbone ,,,. The Staphylococcus epidermidis serine protease has been reported to inhibit the S. aureus biofilm formation . Another example for using enzymatic eradication of biofilm formation was metalloprotease serratiopeptidase (SPEP) produced by Serratia marcescens, which successfully inhibited biofilm formation of both P. aeruginosa and S. epidermidis .
The antibiofilm activity of the extracellular proteases produced by B. licheniformis WT and mutants has been examined against four clinical microbes (P. aeruginosa, S. aureus, E. coli, and B. subtilis) ([Figure 10]). The protease enzyme of WT reduced the biofilm formation of the strain B. subtilis up to 44%, followed by M2, with inhibition ratio 34%. E. coli biofilm inhibition was shown by proteases of WT and M4, with percentage reaching to 51 and 49%, respectively. Similar results have been shown by glycosidase pectinase and protease subtilisins A, which successfully suppressed the E. coli biofilm formation and enhanced its sensitivity to ampicillin . On the contrary, P. aeruginosa biofilm displayed a very low response to proteases of B. licheniformis WT and mutants. However, S. aureus biofilm formation was inhibited over 73% by WT protease and up to 35% by M26 protease. Results showed high percentages of biofilm inhibition of protease produced B. licheniformis WT against most of the tested microbes. Mitrofanova et al.  reported that the proteases of Bacillus sp. have antibiofilm activity through the destruction of the biofilm matrix integrity.
|Figure 10 Biofilm inhibition ratio of proteases produced by Bacillus licheniformis wild type (WT) and mutants (M2, M4, and M26) against four clinical microbes (Pseudomonas aeruginosa, Staphylococcus aureus, Escherichia coli, and Bacillus subtilis). Biofilm was quantified using the microtiter plate test and crystal violet assay. The bars on the graph represent mean±SD as a percentage of biofilm inhibition.|
Click here to view
| Conclusion|| |
The results obtained proved that UV mutagenesis is an efficient tool in improving the alkaline protease production. After the WT bacteria were subjected to UV irradiation, an increasing in the alkaline protease enzyme production from some mutants has been noted. On the contrary, sequencing and alignment of the alkaline protease enzyme genes for the WT and mutants strains showed that no change in the nucleotide sequence of the mutant strains was detected. Results also indicated that some mutants exhibited higher thermostability than the parental WT bacteria. Moreover, the biofilm inhibition activity of the alkaline protease enzyme produced by B. licheniformis WT and mutants has been studied, and the results showed that protease enzyme could be useful for controlling and eradication of biofilm formation process by some pathogenic bacteria.
Financial support and sponsorship
Conflicts of interest
There are no conflicts of interest.
| References|| |
Oyeleke SB, Oduwole AA. Production of amylase by bacteria isolated from a cassava dumpsite
in minna, Nigerstate, Nigeria. Afr J Microbiol Res 2009; 3:143–146.
Alemu FM, Yalew AW, Fantahun M, Ashu EE. Antiretroviral therapy and pregnancy outcomes in developing countries: a systematic review. Int J MCH AIDS 2015; 3:31–43.
Alnahdi HS. Isolation and screening of extracellular proteases produced by new isolated Bacillus sp. J Appl Pharm Sci 2012; 2:071–074.
Naik LS, Aruna K, Sreevennela P, Ramana Devi V. Isolation and biochemical characterization of protease isolated from Bacillus sp. SVN12L. Int J Res Pure Appl Microbiol 2013; 3:94–101.
Sharma AK, Sharma V, Saxena J, Yadav B, Alam A, Prakash A. Optimization of protease production from bacteria isolated from soil. Appl Res J 2015; 1:388–394.
Anwar A, Saleemuddin M. Alkaline proteases: a review. Bioresour Technol 1998; 64:175–183.
Sen S, Mandal B, Veeranki VD. Alkaline protease: a tool to clean environment. In: Spring Meeting & 5th Global Congress on Process Safety. AIChE 2009; New York, USA. 72–73.
Banerjee UC, Sani RK, Azmi W, Soni R. Thermostable alkaline protease from Bacillus brevis
and its characterization as a laundry detergent additive. Prec Biochem 1999; 35:213–219.
Ibrahim NA, Shafei HA, Abdel-Aziz MS, Ghaly MF, Eid BM, Hamed AA. The potential use of alkaline protease from Streptomyces albidoflavus
as an eco- friendly wool modifier. J Text I 2012; 103:490–498.
Pawar R, Zambare V, Barve S, Paratkar G. Application pf protease isolated from Bacillus sp. in enzymatic cleaning of contact lenses. Biotechnology 2009; 8:276–280.
Vishalakshi N, Lingappa K, Amina S, Prabhakar M, Dayanand A. Production of alkaline protease from Streptomyces gulbargensis
and its application in removal of blood stain. Ind J Biotechnol 2009; 8:280–285.
El-Shafei HA, Abdel-Aziz MS, Ghali NJ, Abdulla AAH. Optimizing some factors affecting alkaline protease production by a marine bacterium albidoflavus. Proceedings of 5th sci environmental conference. Egypt: Zagazig University; 2010; 125–142.
Abdel-Aziz MS, El-Shafei HA, Ghaly MF, Hamed AA. Alkaline protease from marine Streptomyces albidflavus
and its probable applications. Appl Sci Res 2011; 7:897–906.
Chi Z, Ma C, Wang P, Li HF. Optimization of medium and cultivation conditions for alkaline protease production by the marine yeast Aureobasidium pullulans. Biores Technol 2007; 98:534–538.
Sindhu R, Suprabha GN, Shashidhar S. Optimization of process parameters for the production of alkaline protease from Penicillium godlewskii
SBSS 25 and its application in detergent industry. Afr J Microbiol Res 2009; 3:515–522.
Maurer KH. Detergent proteases. Curr Opin Biotechnol 2004; 15:330–334.
Haddar A, Agrebi R, Bougatef A, Hmidet N, Sellami-Kamoun A, Nasri M. Two detergent stable alkaline serine-proteases from Bacillus mojavensis
A21: purification, characterization and potential application as a laundry detergent additive. Bioresour Technol 2009; 100:3366–3373.
Jellouli K, Bougatef A, Daassi D, Balti R, Barkia A, Nasri M. New alkaline trypsin from the intestine of grey trigger fish (Balistes capriscus
) with high activity at low temperature: purification and characterization. Food Chem 2009; 116:644–650.
Hathout A, El-Nekeety A, Hamed A, Sabry B, Abdel-Aziz M, Ghareeb M, Aly S. Novel Egyptian bacterial strains exhibiting antimicrobial and antiaflatoxigenic activity. J Appl Pharm Sci 2016; 6:001–010.
Haq I, Ali S, Javed MM, Hameed U, Saleem A, Adnan F, Qadeer MA. Production of alpha amylase from a randomly induced mutant strain of Bacillus amyloliquefaciens
and its application as a desizer in textile industry. Pak J Bot 2010; 42:473–484.
Sidney PC, Nathan OK. Compositions and uses for an alpha-amylase polypeptide of Bacillus
Spp. Meth In Enz 1975; 3–26.
Vasudevan R. Biofilms: microbial cities of scientific significance. J Microbiol Exp 2014; 1:00014
Donlan RM. Biofilm formation: a clinically relevant microbiological process. Clin Infect Dis 2001; 33:1387–1392.
Grant SS, Hung DT. Persistent bacterial infections antibiotic tolerance, and the oxidative stress response. Virulence 2013; 4:273–283.
Flemming H. EPS—Then and Now. Microorganisms 2016; 4:4–41.
Donlan RM. Biofilms: microbial life on surfaces. Emerg Infect Dis 2002; 8:881–890.
Pillich H, Puri M, Chakraborty T. ActA of listeria monocytogenes
and its manifold activities as an important listerial virulence factor. Curr Top Microbiol Immunol 2016; 399:113–132.
Hamed AA, Abdel-Aziz MS, Fadel M. Antimicrobial, antidermatophytic, and cytotoxic activities from Streptomyce
s sp. MER4 isolated from Egyptian local environment. Bull Natl Res Cent 2018; 42:22.
Rodarte MP, Dias DR, Vilela DM, Schwan RF. Proteolytic activities of bacteria, yeasts filamentous fungi isolated from coffee fruit (Coffea arabica
L.). Acta Sci Agron (Online) 2011; 33:457–464.
Abdel-Aziz SM, Hamed AA, Ghaly FM, El-Shafei AH. Purification and characterization of alkaline protease from marine Streptomyces albidoflavus. J Appl Sci Res 2012; 8:3707–3716.
Rao K, Narasu ML. Alkaline protease from Bacillus firmus
7728. Afr J Biotechnol 2007; 6:2493–2496.
Yang JK, Shih IL, Tzeng YM, Wang SL. Production and purification of protease from a Bacillus subtilis
that can deproteinize crustacean wastes. Enzyme Microb Technol 2000; 26:406–413.
Lowry OH, Rosebrough NI, Farr AL, Randall RJ. Protein measurement with the Folin phenol reagent. J Biol Chem 1951; 193:265–275.
Khedr MA, Emad EA, Khalil KMA. Improvement of thermophilic α-amylase productivity through UV mutagenesis and Amy
E gene amplification and sequencing. J Innov Pharm Biol Sci 2017; 4:58–67.
Witkin EM. Ultraviolet-induced mutation and DNA repair. Annual Rev Genet 1969; 23:487–514.
Laemmli UK. Cleavage of the structural proteins during the assembly of the head of bacteriophage. Nature 1970; 227: 680–685.
Harlow E, Lane D. Antibodies: a laboratory manual. 1st edition. New York: Cold Spring Harbor Laboratory Press 1988; 67: 92–120.
Sambrook J, Russell DW. Molecular Cloning: A Laboratory Manual. Cold Spring Harbor. NY: Cold Spring Harbor Laboratory; 2001.
Khedr MA, Emad EA, Khalil KMA. Overproduction of thermophilic α-amylase productivity and Amy E gene sequence of novel Egyptian strain Bacillus licheniformis
MK9 and two induced mutants. Curr Sci Int 2017b; 6:364–376.
Christensen GD, Simpson WA, Younger JJ, Baddour LM, Barrett FF, Melton DM. Adherence of coagulase-negative staphylococci to plastic tissue culture plates: a quantitative model for the adherence of staphylococci to medical devices. J Clin Microbiol 1985; 22:996–1006.
Asha B, Muthusamy P. Optimization of alkaline protease production by Bacillus cereus
FT 1 isolated from soil. J Appl Pharm Sci 2018; 8:119–127.
Nayab, Qasim M, Nawaz A, Rahman H, Tabassum A, Khan T, Mohammad N. Isolation, Screening and Identification of Protease Producing Bacteria from Soil of Karak, Khyber Paktunkhwa, Pakistan. JBMS 2015; 3:18–24.
Singh J, Vohra RM, Sahoo DK. Purification and characterization of two extracellular alkaline proteases from a newly isolated obligate alkaliphilic Bacillus sphaericus
. J Ind Microbiol Biotechnol 2001; 26:387–393.
Joshi SG, Tejashwini MM, Revati N, Sridevi R, Roma D. Isolation, identification and characterization of a feather degrading bacterium. Int J Poult Sci 2007; 6:689–693.
Maal KB, Emtiazi G, Nahvi I. Production of alkaline protease by Bacillus cereus
and Bacillus polymixa
in new industrial culture mediums and its immobilization. Afr J Microbiol Res 2009; 3:491–497.
Amid M, Manap MY, Zohdi NK. Purification and characterization of alkaline-thermostable protease enzyme from Pitaya (Hylocereus polyrhizus)
waste: a potential low cost of the enzyme. Biomed Res Int 2014; 2014:1–9.
Kumar CG. Purification and characterization of thermostable alkaline protease from alkaliphillic Bacillus pumilus
. Lett Appl Microbiol 2002; 34:13–17.
Kumar S, Stecher G, Tamura K. MEGA7: molecular evolutionary genetics analysis version 7.0 for bigger datasets. Mol Biol Evol 2016; 33:1870–1874.
Saitou N, Nei M. The neighbor-joining method: a new method for reconstructing phylogenetic trees. Mol Biol Evol 1987; 4:406–425.
Volff JN, Viell P, Altenbuchner J. Artificial circularization of the chromosome with concomitant deletion of its terminal inverted repeats enhances genetic instability and genome rearrangement in Streptomyces lividans
. Mol Gen Genet 1997; 253:753–760.
Kornberg A, Baker TA. DNA replicsation. New York: W. H. Freeman and Company; 1992.
Martinez JL, Baquero F. Mutation frequencies and antibiotic resistance. Antimicrob Agents Chemother 2000; 44:1771–1777.
Liu H, Hewitt SR, Hays JB. Antagonism of ultraviolet light mutagenesis by the methyl-directed mismatch-repair of Escherichia coli
. Genetics 2000; 154:503–512.
Huang W, Zuo Z, Shen W, Singh S, Chen XZ, Fan Y, Wang ZX. High-level expression of alkaline protease using recombinant Bacillus amyloliquefaciens
. Afr J Biotechnol 2012; 11:3358–3362.
Altschul SF, Gish W, Miller W, Myers EW, Lipman DJ. Basic local alignment search tool. J Mol Biol 1990; 215:403–410.
Kaur I, Kocher GS, Gupta VK. Molecular cloning and nucleotide sequence of the gene for an alkaline protease from Bacillus circulans
MTCC 7906. Indian J Microbiol 2012; 52:630–663.
Kumar CG, Takagi H. Microbial alkaline protease: from bioindustrial viewpoint. Biotechnol Adv 1999; 17:561–594.
Barth G, Gaillardin C. Yarrowia lipolytica C
in nonconventional yeasts in biotechnology In: Wolf K, Ed. A Handbook. Berlin, Heidelberg, New York: Springer 1996. 313–388
Ma CL, Ni XM, Chi ZM, Ma LY, Gao LM. Purification and characterization of an alkaline protease from the marine yeast Aureobasidium pullulans
for bioactive peptide production from different sources. Mar Biotechnol 2007; 9:343–35.
Abdelraof M, Selim MH, Abo Elsoud MM, Ali MM. Statistically optimized production of extracellular l-methionine γ-lyase by Streptomyces
Sp.DMMMH60 and evaluation of purified enzyme in sub-culturing cell lines. Biocatal Agric Biotechnol 2019; 18:101074.
Patel RK, Dodia MS, Joshi RH, Singh SP. Purification and characterization of alkaline protease from a newly Isolated halo alkaliphilic Bacillus
sp. Process Biochem 2006; 41:2002–2009.
Guleria S, Walia A, Chauhan A, Shirkot CK. Purification and characterization of detergent stable alkaline protease from Bacillus amyloliquefaciens
SP1 isolated from apple rhizosphere. J Basic Microbiol 2015; 56:138–152.
Saggu SK, Mishra PC. Characterization of thermostable alkaline proteases from Bacillus infantis
SKS1 isolated from garden soil. PLoS One 2017; 12:11.
Ghorbel B, Sellami-Kamoun A, Nasri M. Stability studies of protease from Bacillus cereus
BG1. Enzyme Microb Technol 2003; 32:513–518.
Seifzadeh S, Sajedi RH, Sariri R. Isolation and characterization of thermophilic alkaline proteases resistant to sodium dodecyl sulfate and ethylene diamine tetraacetic acid from Bacillus
sp.GUS1. Iranian J Biotechnol 2008; 6:214–221.
Ghorbel B, Sellami-Kamoun A, Fakhfakh N, Haddar A, Manni L, Nasri M. Production and purification of acalcium-dependent protease from Bacillus cereus
BG1. J Ind Microbiol Biotechnol 2005; 32:186–194.
Beg QK, Gupta R. Purification and characterization of an oxidation-stable, thiol-dependent Serine alkaline protease from Bacillus mojavensis
. Enzyme Microb Technol 2003; 32:294–304.
Jellouli K, Ghorbel-Bellaaj O, Ben Ayed H, Manni L, Agrebi R, Nasri M. Alkaline protease from Bacillus licheniformis
MP1: purification, characterization and potential application as a detergent additive and for shrimp waste deproteinization. Process Biochem 2011; 46:1248–1256.
Hawumba JF, Theron J, Brozel VS. Thermophilic protease producing Geobacillus
from Buranga hot springs in Western Uganda. Curr Microbiol 2002; 45:144–150.
Khajeh K, Khezre-Barati S, Nemat-Gorgani M. Proteolysis of mesophilic and thermophilic α-amylase. Appl Biochem Biotechnol 2001; 94:97–109.
Indarmawan T, Mustopa AZ, Budiarto BR, Tarman K. Antibacterial activity of extracellular protease isolated from an algicolous fungus Xylaria psidii
KT30 against gram-positive bacteria. HAYATI J Biosci 2016; 23:73–78.
Chapman MR, Robinson LS, Pinkner JS, Roth R, Heuser J, Hammar M, Normark S, Hultgren SJ. Role of Escherichia coli
curli operons in directing amyloid fiber formation. Science 2002; 295:851–855.
Branda SS, Vik S, Friedman L, Kolter R. Biofilms: the matrix revisited. Trends Microbiol 2005; 13:20–26.
Steinberg N, Kolodkin-Gal I. The matrix reloaded: probing the extracellular matrix synchronizes bacterial communities. J Bacteriol 2015; 197:2092–2103.
Omar A, Wright JB, Schultz G, Burrell R, Nadworny P. Microbial biofilms and chronic wounds. Microorganisms 2017; 5:9.
Rabin N, Zheng Y, Opoku-Temeng C, Du Y, Bonsu E, Sintim HO. Biofilm formation mechanisms and targets for developing antibiofilm agents. Future Med Chem 2015; 7:493–512.
Donlan RM, Costerton JW. Biofilms: survival mechanisms of clinically relevant microorganisms. Clin Microbiol Rev 2002; 15:167–193.
Wingender J, Flemming HC. Biofilms in drinking water and their role as reservoir for pathogens. Int J Hyg Environ Health 2011; 214:417–423.
Costerton JW, Stewart PS, Greenberg EP. Bacterial biofilms: a common cause of persistent infections. Science 1999; 284:1318–1322.
Miquel S, Lagrafeuille R, Souweine B, Forestier C. Anti-biofilm activity as a health issue. Front Microbiol 2016; 7:592.
Leroy C, Delbarre-Ladrat C, Ghillebaert F, Compere C, Combes D. Effects of commercial enzymes on the adhesion of a marine biofilm-forming bacterium. Biofouling 2008; 24:11–22.
Sharafutdinov I. HtrA protease from Bacillus subtilis
suppresses the bacterial fouling of the rat skin injuries. Bionanoscience 2016; 6:564–567.
Kristensen JB. Antifouling enzymes and the biochemistry of marine settlement. Biotechnol Adv 2008; 26:471–481.
Lequette Y, Boels G, Clarisse M, Faille C. Using enzymes to remove biofilms of bacterial isolates sampled in the food-industry. Biofouling 2010; 26:421–431.
Pavlukhina SV. Noneluting enzymatic antibiofilm coatings. ACS Appl Mater Interfaces 2012; 4:4708–4716.
Thallinger B, Prasetyo EN, Nyanhongo GS, Guebitz GM. Antimicrobial enzymes: An emerging strategy to fight microbes and microbial biofilms. Biotechnol J 2013; 8:97.
Park JH, Lee JH, Cho MH, Herzberg M, Lee J. Acceleration of protease effect on Staphylococcus aureus
biofilm dispersal. FEMS Microbiol Lett 2012; 335:31–38.
Selan L, Berlutti F, Passariello C, Comodiballanti MR, Thaller MC. Proteolytic-enzymes − a new treatment strategy for prosthetic infections. Antimicrob Agents Chemother 1993; 37:2618–2621.
Mitrofanova O, Mardanova A, Evtugyn V, Bogomolnaya L, Sharipova M. Effects of bacillus serine proteases on the bacterial biofilms. BioMed Res Int 2017; 2017:1–11.
[Figure 1], [Figure 2], [Figure 3], [Figure 4], [Figure 5], [Figure 6], [Figure 7], [Figure 8], [Figure 9], [Figure 10]
[Table 1], [Table 2], [Table 3], [Table 4]